Skip to content
Buy on Amazon and Flipkart

Common chemistry mistakes in NEET, and how to stop making them

Most lost chemistry marks come from small, repeatable slips. Units and molality, Δn with solids, half-life and pH traps, wrong electron counts for ions, forgotten exceptions, reaction conditions and misread stems, each with a worked example and a fix.

14 Nov 2026 6 min read

In this guide
  1. 1. Units, and molality versus molarity
  2. 2. Counting solids and liquids in Δn_g
  3. 3. Half-life and order
  4. 4. pH of very dilute solutions
  5. 5. Electron counts for ions
  6. 6. Forgetting the exceptions
  7. 7. Ignoring reaction conditions
  8. 8. Misreading the stem
  9. Practice: find the answer, avoid the trap
  10. What to do next

Chemistry is the section where well-prepared candidates most often lose marks they should have kept. The questions are short, the options are close, and each option is often the answer to a slightly different question: the one you get by forgetting the solvent, counting a solid as a gas, or using dilute base where the stem said concentrated. With +4 for a right answer and −1 for a wrong one, each slip costs five marks compared with getting it right.

These slips repeat, which is good news. The list below covers the ones that come up again and again, each with an example worked both ways and a fix you can practise until it is automatic.

1. Units, and molality versus molarity

The slip. Using the mass of the solution instead of the solvent for molality, or millilitres where litres are needed.

Example. 5.85 g of NaCl (M = 58.5 g mol⁻¹) is dissolved in 500 g of water. Find ΔTf (Kf = 1.86 K kg mol⁻¹, NaCl fully dissociated).

  • Moles of NaCl = 5.85/58.5 = 0.1 mol. Molality = 0.1/0.5 kg = 0.2 m.
  • i = 2, so ΔTf = 2 × 1.86 × 0.2 = 0.744 K.
  • Common wrong answers: 0.372 K (forgetting i), or dividing by the mass of the solution (about 506 g) instead of the solvent.

The fix. Write the unit next to every number. Molarity is per litre of solution; molality is per kilogram of solvent. Use R = 8.314 J K⁻¹ mol⁻¹ for energy and 0.0821 L atm K⁻¹ mol⁻¹ for osmotic pressure in atm.

2. Counting solids and liquids in Δn_g

The slip. Counting every species in the equation when finding Δn_g for Kp = Kc(RT)ˣ, where x = Δn_g.

Example. CaCO₃(s) ⇌ CaO(s) + CO₂(g).

  • Only CO₂ is a gas: Δn_g = 1 − 0 = 1, so Kp = Kc(RT).
  • Kp is simply the pressure of CO₂. The solids do not appear in K at all.

The fix. Circle the (g) labels before counting. The same rule applies to ΔH = ΔU + Δn_g RT. More in equilibrium.

3. Half-life and order

The slip. Treating every half-life as constant, or confusing "87.5% remaining" with "87.5% complete".

Example. A first-order reaction has t½ = 10 min. How long for 87.5% completion?

  • Remaining: 100% → 50% → 25% → 12.5%. That is three half-lives.
  • Time = 3 × 10 = 30 min.

A zero-order reaction behaves differently: its t½ = [R]₀/2k, so it shrinks as the concentration falls. Order is found by experiment and can be zero or fractional; molecularity is a whole number for an elementary step.

The fix. Before using t½ = 0.693/k, check the order. Read "completed" and "remaining" twice.

4. pH of very dilute solutions

The slip. Saying the pH of 10⁻⁸ M HCl is 8. An acid cannot give a basic solution.

Example.

  • At this dilution the H⁺ from water (10⁻⁷ M) is larger than the H⁺ from the acid.
  • Solving properly gives [H⁺] ≈ 1.05 × 10⁻⁷ M, so pH ≈ 6.98, just below 7.

The fix. If an acid is more dilute than about 10⁻⁶ M, include water's contribution. The same logic applies to very dilute bases.

5. Electron counts for ions

The slip. Removing 3d electrons before 4s when writing the configuration of a transition-metal ion.

Example. Find the spin-only magnetic moment of Fe²⁺ (Z = 26).

  • Fe: [Ar] 3d⁶ 4s². Fe²⁺ loses the 4s electrons first: [Ar] 3d⁶.
  • 3d⁶ has 4 unpaired electrons. μ = √(4 × 6) = √24 ≈ 4.90 BM.
  • The trap: removing 3d electrons gives 3d⁴4s², with a different answer.

The fix. Electrons fill 4s before 3d, but leave 4s first. Remember the two configuration exceptions: Cr is 3d⁵4s¹ and Cu is 3d¹⁰4s¹.

6. Forgetting the exceptions

NEET inorganic questions are built on exceptions. Keep a single exceptions page and read it weekly. The ones that turn up most often:

TrendExpectedActual exceptionReason
First ionisation enthalpy across a periodRises steadilyBe > B and N > OFull 2s; half-filled 2p
Electron gain enthalpy down group 17F most negativeCl more negative than FSmall F: electron–electron repulsion
Atomic radius down group 13IncreasesGa slightly smaller than AlPoor shielding by 3d electrons
Stable oxidation state in groups 13–14Group valencyTl⁺ and Pb²⁺ more stableInert pair effect
Size of 4d and 5d elements5d largerZr and Hf almost equalLanthanoid contraction

For the full picture see the periodic table and p-block elements.

7. Ignoring reaction conditions

In organic chemistry the reagent alone often does not decide the product. The condition does.

Reagent pairProduct changes becauseResult
Aqueous KOH vs alcoholic KOH on R–XOH⁻ substitutes; alkoxide eliminatesAlcohol vs alkene
Dilute NaOH vs concentrated NaOH on an aldehydeAldol needs α-H; Cannizzaro needs noneAldol product vs alcohol + salt
HBr with and without peroxideRadical path vs carbocation path1-bromo vs 2-bromo product (propene)
Lindlar's catalyst vs Na in liquid NH₃Syn vs anti additioncis vs trans alkene
Bromine water vs Br₂ in CS₂ on phenolIonising vs non-polar solventTribromophenol vs monobromophenols
KCN vs AgCN on R–XIonic vs covalent cyanideNitrile vs isocyanide
Conc. H₂SO₄ with ethanol at 443 K vs 413 KElimination vs substitutionEthene vs ethoxyethane

Example. Benzaldehyde is warmed with dilute NaOH. A candidate picks an aldol product. But benzaldehyde has no α-hydrogen, so no aldol forms; with concentrated NaOH it gives the Cannizzaro products, benzyl alcohol and sodium benzoate.

The fix. Every entry in your reaction notes needs three parts: reagent, condition, product. Revise haloalkanes and carbonyl compounds this way.

8. Misreading the stem

The slip. Answering the question you expected, not the one printed. Common traps:

  • "Which is incorrect" or "which is not". Mark the negative word on the paper before reading options.
  • "How many of the following…" questions. Count each item separately and write ✓ or ✗ beside it; one wrong tick changes the answer.
  • "Major product" versus "product". The minor product is often among the options.
  • Assertion–reason. Judge A and R separately first, then ask whether R actually explains A.
  • "At 298 K" or "in aqueous solution". Basicity of amines, for example, differs between water and the gas phase.

The fix. Underline the operative word and the conditions before you look at the options.

Practice: find the answer, avoid the trap

  1. 0.1 mol of glucose is dissolved in 250 g of water. The molality is: (a) 0.025 m (b) 0.04 m (c) 0.1 m (d) 0.4 m
  2. For 2NH₃(g) ⇌ N₂(g) + 3H₂(g), Kp/Kc equals: (a) (RT)² (b) RT (c) 1/RT (d) 1
  3. The spin-only magnetic moment of Mn²⁺ (Z = 25) is about: (a) 3.87 BM (b) 4.90 BM (c) 5.92 BM (d) 1.73 BM
  4. A first-order reaction is 75% complete in 40 min. Its half-life is: (a) 10 min (b) 20 min (c) 30 min (d) 40 min
  5. Which has the most negative electron gain enthalpy? (a) F (b) Cl (c) Br (d) I
  6. Propene with HBr in the presence of peroxide gives mainly: (a) 1-bromopropane (b) 2-bromopropane (c) 1,2-dibromopropane (d) propane

Answers

  1. (d) 0.1 mol ÷ 0.25 kg = 0.4 m. Option (c) forgets to divide by the mass of solvent at all.
  2. (a) Δn_g = 4 − 2 = 2.
  3. (c) Mn²⁺ is 3d⁵, with 5 unpaired electrons: √35 ≈ 5.92.
  4. (b) 75% complete is two half-lives, so t½ = 20 min.
  5. (b) Chlorine, not fluorine.
  6. (a) Anti-Markovnikov addition by the radical path.

What to do next

  • Start an error log today. For every wrong answer in a mock, write which of the eight slips above it was.
  • After two weeks, count the entries. Your most frequent slip is your first fix.
  • Build the exceptions page and the reagent–condition–product table, and read both weekly.
  • Use the NEET chemistry revision sheet for the final pass.

A note on dates and numbers. Exam patterns, vacancies and schedules change from year to year. Always confirm the current details in the latest notification on the National Testing Agency website .

Get the next NEET guide by email

New guides every week. No spam, unsubscribe any time.

Keep reading

NEETChemistryAmines and biomolecules for NEETPreparation and basic strength of amines, the Hinsberg and carbylamine tests, diazonium salts in synthesis, then carbohydrates (glucose, fructose, sucrose, maltose, lactose, starch), protein structure and denaturation, vitamins, nucleic acids and hormones. Worked NEET questions and practice MCQs. 8 min read·9 Nov 2026NEETChemistryAldehydes, ketones and carboxylic acids for NEETThe carbonyl group, nucleophilic addition of HCN, bisulphite, Grignard reagents and ammonia derivatives, Clemmensen and Wolff–Kishner reductions, acidity of α-hydrogen, aldol and Cannizzaro reactions, the haloform reaction, tests for aldehydes and ketones, and the acidic strength of carboxylic acids. Worked NEET questions and practice MCQs. 7 min read·5 Nov 2026NEETChemistryAlcohols, phenols and ethers for NEETPreparation with Grignard reagents and hydroboration, telling 1°, 2° and 3° alcohols apart, the mechanism of dehydration, acidity of phenols with substituents, nitration, halogenation and sulphonation of phenol, Kolbe and Reimer–Tiemann reactions, and Williamson synthesis and cleavage of ethers. Worked NEET questions and practice MCQs. 7 min read·2 Nov 2026NEETChemistryHaloalkanes and haloarenes for NEETThe C–X bond, preparation by halogen exchange and from alcohols, SN1 and SN2 mechanisms with stereochemistry, elimination and Saytzeff's rule, Grignard and Wurtz reactions, why haloarenes resist substitution, and the environmental effects of chloroform, iodoform, freons and DDT. Worked NEET questions and practice MCQs. 8 min read·1 Nov 2026