In this guide
The d- and f-block chapter mixes reasoning with a small set of facts. Questions ask why a trend exists, which ion is coloured or has a given magnetic moment, what KMnO₄ becomes in a given medium, or what the lanthanoid contraction causes. Almost all of it concerns the first transition series (Sc to Zn) plus two compounds, so the chapter is smaller than it looks.
The official 2026 syllabus lists the electronic configuration and general trends of the first-row transition elements (physical properties, ionisation enthalpy, oxidation states, atomic radii, colour, catalytic behaviour, magnetic properties, complex formation, interstitial compounds, alloy formation); the preparation, properties and uses of K₂Cr₂O₇ and KMnO₄; the configuration, oxidation states and contraction of the lanthanoids; and the configuration and oxidation states of the actinoids.
Configurations and what counts as a transition element
The general configuration is (n − 1)d¹⁻¹⁰ ns¹⁻². Two exceptions in the first series come from the extra stability of half-filled and filled d subshells: Cr is 3d⁵ 4s¹ and Cu is 3d¹⁰ 4s¹.
When a transition metal forms an ion, it loses the 4s electrons first. Fe is 3d⁶ 4s², Fe²⁺ is 3d⁶ and Fe³⁺ is 3d⁵.
A transition element has an incompletely filled d subshell in the atom or in a common oxidation state. So Zn, Cd and Hg are not transition elements (d¹⁰ in the atom and the ion), while Cu is (Cu²⁺ is d⁹).
Trends across the first series
- Atomic radius falls at first, stays nearly constant through the middle, and rises slightly near the end, as added d electrons shield the growing nuclear charge.
- Melting points are high and peak near the middle of the series, where more unpaired d electrons strengthen metallic bonding. Zn, Cd and Hg have low melting points; Hg is a liquid.
- Ionisation enthalpy rises across the series, but irregularly.
- Oxidation states increase to Mn and then fall.
| Element | Sc | Ti | V | Cr | Mn | Fe | Co | Ni | Cu | Zn |
|---|---|---|---|---|---|---|---|---|---|---|
| Common states | +3 | +4 | +5, +4 | +3, +6 | +2, +7 | +2, +3 | +2, +3 | +2 | +1, +2 | +2 |
| Highest | +3 | +4 | +5 | +6 | +7 | +6 | +4 | +4 | +2 | +2 |
Up to Mn, the highest state equals the number of 3d + 4s electrons. The highest states appear in oxides and fluorides (MnO₄⁻, CrO₃, V₂O₅), because O and F are small and very electronegative.
Stability from configuration explains redox behaviour: Cr²⁺ is a strong reducing agent (d⁴ becomes the stable half-filled t₂g³ in Cr³⁺), while Mn³⁺ is a strong oxidising agent (d⁴ becomes d⁵ in Mn²⁺). Copper has a positive E°(Cu²⁺/Cu), so it does not release H₂ from dilute acids.
Colour, magnetism and other properties
Colour comes from d–d transitions: an electron jumps between split d levels by absorbing visible light, and we see the complementary colour. Ions with d⁰ or d¹⁰ configurations have no d–d transition and are colourless: Sc³⁺, Ti⁴⁺, Cu⁺, Zn²⁺.
Magnetism: unpaired electrons make an ion paramagnetic. The spin-only moment is μ = √[n(n + 2)] BM, where n is the number of unpaired electrons.
| Unpaired electrons | 1 | 2 | 3 | 4 | 5 |
|---|---|---|---|---|---|
| μ (BM) | 1.73 | 2.83 | 3.87 | 4.90 | 5.92 |
| Example ions | Ti³⁺, Cu²⁺ | V³⁺, Ni²⁺ | Cr³⁺, Co²⁺ | Fe²⁺, Mn³⁺ | Mn²⁺, Fe³⁺ |
Catalysis: variable oxidation states and the ability to adsorb reactants make transition metals good catalysts: V₂O₅ in the contact process, iron in the Haber process, nickel in hydrogenation of oils.
Interstitial compounds form when small atoms (H, C, N) occupy holes in the metal lattice, as in TiC, Fe₃H and Mn₄N. They are hard, have high melting points, keep metallic conductivity and are chemically fairly inert. Alloys form readily because neighbouring transition metals have similar radii: brass (Cu–Zn), bronze (Cu–Sn) and steels.
Potassium permanganate (KMnO₄)
Preparation: MnO₂ is fused with KOH and an oxidant such as air or KNO₃ to give green K₂MnO₄:
2MnO₂ + 4KOH + O₂ → 2K₂MnO₄ + 2H₂O.
Manganate then disproportionates in neutral or acidic solution: 3MnO₄²⁻ + 4H⁺ → 2MnO₄⁻ + MnO₂ + 2H₂O. Commercially, it is oxidised electrolytically.
| Medium | Product | Mn goes from | Electrons gained |
|---|---|---|---|
| Acidic | Mn²⁺ | +7 to +2 | 5 |
| Neutral or weakly alkaline | MnO₂ | +7 to +4 | 3 |
| Strongly alkaline | MnO₄²⁻ | +7 to +6 | 1 |
In acid it oxidises Fe²⁺ to Fe³⁺, oxalate to CO₂ (2MnO₄⁻ + 5C₂O₄²⁻ + 16H⁺ → 2Mn²⁺ + 10CO₂ + 8H₂O), I⁻ to I₂ and H₂S to S. It acts as its own indicator in titrations. HCl is not used to acidify it, because permanganate oxidises chloride to Cl₂; dilute H₂SO₄ is used instead.
Potassium dichromate (K₂Cr₂O₇)
Preparation from chromite ore (FeCr₂O₄):
- Fusion with sodium carbonate in air: 4FeCr₂O₄ + 8Na₂CO₃ + 7O₂ → 8Na₂CrO₄ + 2Fe₂O₃ + 8CO₂
- Acidification: 2Na₂CrO₄ + 2H⁺ → Na₂Cr₂O₇ + 2Na⁺ + H₂O
- Treatment with KCl: the less soluble K₂Cr₂O₇ crystallises
Chromate (yellow) and dichromate (orange) interconvert with pH: 2CrO₄²⁻ + 2H⁺ ⇌ Cr₂O₇²⁻ + H₂O. Chromium stays +6, so this is not a redox change. Chromate is tetrahedral; dichromate is two tetrahedra sharing one oxygen.
In acid: Cr₂O₇²⁻ + 14H⁺ + 6e⁻ → 2Cr³⁺ + 7H₂O. It oxidises Fe²⁺, I⁻ and H₂S, and serves as a primary standard in volumetric analysis.
Lanthanoids and actinoids
| Feature | Lanthanoids (Ce–Lu) | Actinoids (Th–Lr) |
|---|---|---|
| Configuration | [Xe] 4f¹⁻¹⁴ 5d⁰⁻¹ 6s² | [Rn] 5f¹⁻¹⁴ 6d⁰⁻¹ 7s² |
| Common state | +3 | +3 |
| Other states | Ce⁴⁺ (oxidant), Eu²⁺ and Yb²⁺ (reductants) | Wider range, up to +7 for Np and Pu |
| Contraction | Lanthanoid contraction | Larger contraction (5f shields even more poorly) |
| Radioactivity | Only promethium | All radioactive |
The lanthanoid contraction is the steady fall in size from La to Lu because 4f electrons shield poorly. Its consequences: Zr and Hf have almost the same radius (so they are hard to separate), 4d and 5d elements of a group resemble each other, and the basicity of Ln(OH)₃ falls from La(OH)₃ to Lu(OH)₃. The stable +4 and +2 states follow from f⁰, f⁷ and f¹⁴: Ce⁴⁺ is f⁰, Eu²⁺ is f⁷ and Yb²⁺ is f¹⁴.
Worked problems
Problem 1: spin-only moments. Compare Fe²⁺ and Fe³⁺.
Fe²⁺ is 3d⁶ with 4 unpaired electrons: μ = √24 = 4.90 BM. Fe³⁺ is 3d⁵ with 5: μ = √35 = 5.92 BM.
Problem 2: colourless ions. Which of Sc³⁺, Ti³⁺, V³⁺, Cu⁺, Zn²⁺ and Ni²⁺ are colourless in water?
Sc³⁺ (d⁰), Cu⁺ (d¹⁰) and Zn²⁺ (d¹⁰). Three. The others have partly filled d subshells.
Problem 3: permanganate and oxalate. What volume of 0.02 M KMnO₄ oxidises 25 mL of 0.05 M oxalic acid in acid?
Oxalate = 25 × 0.05 = 1.25 mmol. MnO₄⁻ : C₂O₄²⁻ = 2 : 5, so MnO₄⁻ = 0.5 mmol. Volume = 0.5/0.02 = 25 mL.
Problem 4 (numerical answer): dichromate titration. Find the volume in mL of 0.1 M K₂Cr₂O₇ that oxidises 30 mL of 0.2 M FeSO₄ in acid.
Fe²⁺ = 6 mmol. One Cr₂O₇²⁻ takes 6 electrons, so it oxidises 6 Fe²⁺; dichromate needed = 1 mmol. Volume = 1/0.1 = 10.
Traps to watch
- Filling order for ions. Remove 4s before 3d.
- Calling MnO₄⁻ colour a d–d transition. It is charge transfer.
- Using HCl to acidify KMnO₄.
- Treating chromate–dichromate as redox. Chromium stays +6.
- Forgetting Cr and Cu are exceptions in configuration questions.
Practice set
- Which is colourless, Ti³⁺ or Sc³⁺?
- How many electrons does one MnO₄⁻ gain in acid?
- Why is zinc not treated as a transition element?
- Write the configurations of Cr and Cu.
- Which is the stronger reducing agent, Cr²⁺ or Fe²⁺?
- Find the spin-only moment of Cu²⁺.
- Why do Zr and Hf have nearly equal radii?
- What happens to yellow chromate solution when acid is added?
Answers
- Sc³⁺ (d⁰).
- 5.
- It has a full d¹⁰ subshell in the atom and in Zn²⁺.
- Cr 3d⁵ 4s¹; Cu 3d¹⁰ 4s¹.
- Cr²⁺: losing an electron gives the stable t₂g³ configuration of Cr³⁺.
- One unpaired electron: 1.73 BM.
- The lanthanoid contraction cancels the expected size increase from Zr to Hf.
- It turns orange as dichromate forms; chromium stays +6.
What to do next
- Learn the μ table and practise finding unpaired electrons for every first-series ion.
- Write the KMnO₄ and K₂Cr₂O₇ half-reactions until they come without thinking.
- Continue with coordination chemistry, and use redox and electrochemistry for titration stoichiometry.
A note on dates and numbers. Exam patterns, vacancies and schedules change from year to year. Always confirm the current details in the latest notification on the National Testing Agency website .
Get the next JEE Main guide by email
New guides every week. No spam, unsubscribe any time.